Pages

Thursday, November 30, 2017

Making Death Guard Great Again: Plague Marine WIP

Creeping Death.

After the release of all the Death Guard models this year, we were quite critical of them, disliking their distorted anatomy, with their huge thigh gaps, and their general lack of abdomens. Rather than simply complain about these issues, with the suggestion from bigbossredskullz, we decided to invite anyone interested to take part in a challenge to convert some new Death Guard models to address them. Much to our excitement, we have already gotten some amazing entries, which we are going to share on the blog on December 18th. That leaves a little over two weeks for anyone new to join the challenge. As inspiration, we wanted to share the current progress of our Death Guard plague marine!


Although I intended to simply convert a model from the Dark Imperium Death Guard, I ended up expanding to include Primaris marines, for his legs.

His bolter and plague knife were both created using old 2nd edition plastic weapons.

It had always been my intent to create this model almost entirely off of one of the new Death Guard plastic models. I went so far as to order some of the plague marine models from the Dark Imperium boxed set, but after getting them in my hands and experimenting with them, I realized they were so bloated with detail that it would be easier to achieve what I envisioned by using some Primaris Space Marine components along with sculpting. I started by taking a pair of Primaris legs, which I modified to look like MKIII Iron Armor with green stuff. The body was largely created with Dark Imperium Plague Marine pieces that I spliced together. To create it, I separated the belly plate from the gorget and used green stuff to space them out, creating a more reasonable looking torso. With the increased size of the Plague Marine, due to my modifications, normal arms looked too small. To rectify this, I ended up using terminator arms, adding an armored plate from a MKIII wrist. I wanted to have the model licking his plague knife, and found that the Forge World Abaddon head worked well for this. I used a small piece of wire and green stuff to make the final tongue.


I created a sheath for his plague knife by trimming down one from a MKIV tactical squad.

Despite being being substantially larger than the Dark Imperium Death Guard models, the weapons I used for my creation are much smaller, emphasizing the character over his weapons.

When thinking about weapons for the Death Guard, I decided to stick with classic ones, a bolter and a plague knife. To fit with this imagery, I used an old Second edition bolter and knife to create the weapons. They did not require too much extra converting, however, I did add a stock and rear sights to the bolter. I also added a sheath for his plague knife on his thigh, created from one that came with MKIV Space Marines.


As you can see, the new Death Guard stands about a head taller than a Primaris Space marine and Dark Imperium Death Guard.

The Death Guard that I created towers over the stock Death Guard models, as well as the plastic Scions.

I hope you like the Death Guard that I created as much as I do! When starting the project I was unsure how it would turn out, but as I started working on him, everything really started falling into place. Although he is a little larger than other Chaos Space Marines, I think he is far more imposing as a result, something very fitting a Veteran of the Long War. If you have any questions or comments let me know. Also, if you would like to try your hand at converting a Death Guard model for the challenge, there is still time left! Email any pictures to us (betweenthebolterandme@gmail.com) before the 18th of December so that we can feature everyone’s creations on Between the Bolter and Me!

- Adam Wier

12 comments:

  1. Agh; if only I'd paid more attention earlier. This sounds right up my street; so if I can get something sorted by the deadline, I will :)

    In any case, lovely conversion work on that Death Guard legionary (Death Guardsman? Death Guardian?); will he be seeing some paint before the deadline?

    ReplyDelete
    Replies
    1. We would love if you could participate! If you are interested, don't worry about the deadline too much. We could feature your model afterwards, maybe even when mine gets painted. Due to time constraints, I am not sure if I will be able to finish painting mine by the deadline.

      Delete
  2. Looks awesome! Great choice of components too. Just one thing, maybe it' s just the pictures, but It looks like the head is a bit too high, isn' it? But it's hard to tell. Anyhow, great miniature!

    ReplyDelete
    Replies
    1. I am glad you like the model! It is pretty difficult judging the proportions on the model due to the awkward belly plate (making it tricky to see where his waist actually is). The proportions also look a little different than your standard marine because his shoulder guards are not seated as high and are more in line with his actual shoulders. I think his head is right where it needs to be. I will look at the placement again tonight and re-assess. Thanks for the suggestion!

      Delete
  3. Replies
    1. Thanks for the kind words! I think the adjusted proportions and scale really help to communicate the sheer bulk and violence inherit in any chaos space marine!

      Delete
  4. Looks excellent that tongue is such a good touch and I didnt even recognize that it was Abbadon's head you used for this! Excellent work man, can't wait to see him painted!

    ReplyDelete
    Replies
    1. I was really pleased with how well Abaddon's head fit with the model (and was compatible with giving him an extended tongue). I have had that model of Abaddon for a number of years now. It was good to finally find a use for some of the model. (:

      Delete
  5. Nice model, a bit too tall for me, but I think it´s a matter of taste

    ReplyDelete
    Replies
    1. He is quite tall, standing a good deal higher than a standard Primaris Space marine. I imagine that space marines (whether Imperial of Renegade) would range in sizes. For this model I really wanted him to be larger and more imposing than your typical Primaris Space marine. As a veteran of the Long War who knows what he has endured!

      Delete
  6. Gorgeous! It's so realistic now! Putting together your and an original one underlines a lot your great work. It should be done a full army like your model but it's a massive work I suppose.

    ReplyDelete
    Replies
    1. It would be awesome to create an entire army of Death Guard marines like this. Some day I will have to find the time to do so. All the new Primaris space marine kits makes the process a lot more manageable. :)

      Delete